Table of Contents
Advertisement
13-28 Administration Guide
Any customized filter set you create can be associated with the Ethernet hub as shown below:
Security Databases...
RADIUS Server Addr/Name:
RADIUS Server Secret:
Alt RADIUS Server Addr/Name:
Alt RADIUS Server Secret:
RADIUS Identifer:
RADIUS Server Authentication Port: 1812
LAN (EN Hub) IP Filter Set...
Remove Filter Set
Select LAN (EN Hub) IP Filter Set and from the pop-up menu, select the filter set you want to associate with the
LAN interface.
Security Databases...
RADIUS Server Addr/Name:
RADIUS Server Secret:
Alt RADIUS Server Addr/Name:
Alt RADIUS Server Secret:
RADIUS Identifer:+-------------------------------------+
RADIUS Server Aut+-------------------------------------+
LAN (EN Hub) IP F|
Remove Filter Set|
Up/Down Arrows to select, then Return/Enter; ESC to cancel.
Press Return. The filter set you select will be applied to the Ethernet hub interface.
CAUTION! You should not attach the default filter sets Basic Firewall or NetBIOS Filter to the Ethernet LAN or
its subnets. This may result in a loss of connectivity to the network or subnet. Instead, create a new filter set in
accordance with the standard filtering rules described earlier.
Advanced Security Options
Local only
Advanced Security Options
Local only
| Basic Firewall
| NetBIOS Filter
| My LAN Filterset 1
| My LAN Filterset 2
|
|
+-------------------------------------+
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
