Advertisement
Available languages
Available languages
Failure Inspection for induction cooktop
If an abnormality comes up, the induction cooktop will enter the protective
state automatically and display corresponding protective codes:
Problem
Possible causes
E1/E2
Abnormal supply voltage
High temperature of the
E3
pan sensor
High temperature of the
E5
IGBT temperature sensor
1. If a pan is too small for
the induction burner, it can
still be used. However, if
the pan is a lot smaller
than the burner, you may
find that the induction hob
won't activate when the
pan is placed on the
burner. This is simply
because the pan is too
small to register on the
magnets.
2. Wrong pot size used by
the customer.
3.Pot not appropriate for
induction cooktops.
For all other error codes, switch off and call your service provider.
What to do
Please check whether power
supply is normal, Power on after
the power supply is normal.
Check whether no liquid in pan,
fill with liquid then restart.
Please restart after the
induction cooktop cools down.
1. The cooking zones will not
switch on if pots are not the
right size. Only use pots bearing
the symbol "INDUCTION
SYSTEM"
2. Use a magnet to check if the
bottom of the pot is suitable for
the induction cooktop: bottom
of the pots and pans are
unsuitable if not magnetically
detectable.
25
Advertisement
