Advertisement
Available languages
Available languages
cooking zone are clean and dry.
3.
Set heating level of cooking zone
•You can adjust heat setting from 0-12 by touching
the slider control.
Notes:
1. After connect to electricity, when power on, the buzzer of cooktop beeps
once, all indicators light up for 1 second then go out.
2. When the cooktop in Standby mode, if there is no practice within 1 minute,
the electric cooktop will auto turn off, with buzzer beeps once.
3. To turn on cooktop, press the ON/OFF control button and hold on for about 3
seconds; To turn it off, just need to press ON/OFF button again.
4. The power level can be adjusted from 0 to 12, default setting is level 5.
5. The heat setting indicator of the selected zone flashing when adjusting.
After adjusting, the number flashing for 5 seconds then stop flashing,
then the setting is confirmed.
To turn off cooktop
1. You can turn the cooking zone off by adjust heat setting to
level 0, which the power level display LED shows "--".
2. You can also turn the whole cooktop off by touching the
ON/OFF
control button.
Note: If there is power cut off during cooking, all setting will be cancelled.
Note: The cooling fan of induction cooktop will remain on for about 1 minute
after the cooktop be turned off.
Using Large Heating Area-Ceramic Cooktop
ACH7324/BLV, ACT7324/BLV have one or two extended cooking zones
(Dual zone), these extended zones can provide larger cooking area and
additional heat. To active the extended zone, please follows below:
To active Extended zone when cooktop is working, please follows below:
1. Touch the slider control button of corresponding heating zone to
active it for adjustment.
2. The central zone will be switched on, when first adjust of heat
level for extended cooking zone.
3. When the heating zone be selected and active (power level
15
Advertisement
