Sc101T Rear Panel - NETGEAR SC101 User Manual

Storage Central Turbo Model SC101T and Storage Central Model SC101 User Manual

SC101T Rear Panel

The Storage Central Turbo SC101T rear panel is shown and described in the following table.
SC101T Rear Panel
latches
Power Reset
connector button
On/Off
Ethernet
button
port with LEDs
Item
Power connector
Ethernet port with
LEDs
Reset button
u r e 1 - 2 F i g
On/Off button
v1.0, December 2006
Description
Connects to the SC101T power adapter
Use this port to connect to an Ethernet LAN.
The port has a green LED and a yellow LED to
indicate Ethernet LAN Link Activity.
• Green off: No power, or connected to 10/100Mbps
Ethernet LAN.
• Green on: Connected to 1Gbps Ethernet LAN.
• Green blinking: Data traffic on the 1Gbps
Ethernet LAN.
• Yellow off: No power, or connected to 1Gbps
Ethernet LAN.
• Yellow on: Connected to 10/100Mbps Ethernet
LAN.
• Yellow blinking: Data traffic on the 10/100Mbps
Ethernet LAN.
You can use the rest button to reboot the Storage
Central, or to reset it to factory default settings.
• Reboot: Push and release to reboot.
• Reset: Push and hold for eight or more seconds to
reset the Storage Central to factory defaults. This
restores the password for administrator to
"password", and detaches all drives.
Turn the Storage Central on or off.
1-3