Setting Up Wpa-Psk Security - NETGEAR RangeMax WN511T User Manual

NETGEAR RangeMax NEXT Wireless Notebook Adapter WN511B User Manual
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
Figure 1-10
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the SSID that you
c. In the Security section, select WPA2-PSK [AES].
For more information about WPA2-PSK security, see the online document:
http://documentation.netgear.com/reference/enu/wireless/index.htm
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.
1. Run the Smart Wizard.
1-14
enter exactly matches the SSID used by the access point
v2.0, February 2007