Installing Usb Configuration Utility; Configuring Access Point - NETGEAR ME102 Reference Manual

802.11b wireless access point
Hide thumbs Also See for ME102:
Table of Contents

Advertisement

Installing USB Configuration Utility

The access point USB configuration utility enables you to modify the various configurable parameters of
the access point.
1.
Insert the ME102 Wireless Access Point Resource CD into the CD-ROM drive. From the
Windows 98 desktop, double-click on My Computer . Double-click on the CD-ROM drive to look
into the content of the CD. Double-click on the USBMANG folder. Windows displays all of the
files in the \USBMANG directory of the CD.
2.
Double-click on the SETUP application icon to start the installation procedure. The InstallShields
Wizard opens. Click on "Next" to continue.
3.
Click on "Browse" to change the destination location where the Access Point USB utility is
installed. Otherwise, click on "Next" to continue.
4.
Modify the "Program Folders" entry field if desired. Click on "Next" to continue. InstallShields
starts copying files into your system.
5.
Click on "Finish" to complete the installation of the access point USB utility.

Configuring Access Point

From the Windows desktop, select Start ⇒ Program ⇒ NETGEAR ME102 AP ⇒ Access Point USB
Manager . The opening screen opens showing the firmware version of the access point and the access
point USB utility software version. Click on "Configure" to go into the main USB management window.
Click on the "Get Value" button to retrieve the current configurable settings from the access point.
To modify the access point parameters, first click on the intended parameter to select the parameter.
And click on "Modify". A pop-up window appears inquiring for changes to the parameter. Enter any
desired changes and click "OK" to accept the changes.
After making modification to all of the parameters, click on "Set" to send the changes to the access
point. It is recommended to make all intended changes prior to clicking "Set" to configure the access
point all at once.
When configuration is done. Click on "Exit" on the device window and click on "Exit" at the main
window to quit the USB configuration utility.
7

Advertisement

Table of Contents
loading

Table of Contents