Table of Contents
Advertisement
5
Verify the Installation
To complete the installation, connect the power adapter first to the power jack on the hub rear
panel and then to the power outlet on the wall. When power has been applied to the hub:
•
The green Pwr (power) LED on the front panel is on.
•
The green Link/Rx LED on each connected port is on.
•
The green Link/Rx LED on each connected port is blinking when data is being received by
that port.
If there are any problems, refer to "Troubleshooting Information."
Model FE116 Fast Ethernet Hub Installation Giude
Advertisement
Table of Contents
