Verify Installation - NETGEAR ProSafe GS504 Installation Manual

Using the SC Connector
The duplex SC connector connects stations, hubs, and switches that support the
1000BASE-SX fiber interface. Each fiber link needs a clearly defined, external
crossover. In other words, the transmit port of one interface must be wired to the
receive port of the opposite interface and vice versa. Fiber cables must be
connected in this manner to transmit and receive data.

Verify Installation

When power has been applied to the switch, verify that:
• The green Pwr LED on the front panel is on.
• The green Link LED on each connected port is on.
When the switch is connected and operating, refer to the table in "LEDs" for
information about the LEDs and their activity.
Model GS504 4-Port Gigabit Switch Installation Guide
Tx Rx
8895FA