1.8.1.4
Network Configuration
1.8.2
SIMOCODE DP behind the Y-Link
1.8.2.1
GSD: SIMOCODE DP basic type selection
• Open STEP 7 HW Config. From the Hardware Catalog, Profile standard, navigate to PROFIBUS
DP-> Additional Field Devices→ Switching Devices → SIMOCODE-DP. Place this device on the
PROFIBUS network.
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003
Introduction
1.8 Example configurations
19