Table of Contents
Advertisement
1
2
3
4
WATER CONNECTION
Ensure the refrigerator is not plugged
into a power supply. Locate the isolation
tap for cold water connection (tee and
tap fitting not supplied).
Locate the water filter kit to complete
the water connection installation.
Fasten the tap adaptor with short tube
to the isolation tap. Tighten by hand
and tighten one additional turn with a
spanner. Take care not to overtighten.
Insert the end of tap adaptor short tube
into one end of the first hose connector
as far as possible.
5
6
7
8
Insert one end of the water hose into
the other end of hose connector as far
as possible.
Insert the other end of the water
hose into one end of the second hose
connector as far as possible.
Connect the other end of the second
hose connector to the hose attached to
the back of the product.
Push the hose as far as possible into the
connector.
Check the connections, turn on the
water supply and check for leaks.
11
Advertisement
Table of Contents
