Troubleshooting; Technical Specifications - NETGEAR GS108GE Installation Manual

Prosafe 8 port 10/100/1000 mbps
Table of Contents

Advertisement

Troubleshooting

The Power light is not lit
The switch has no power.
Make sure the power cord is properly connected to the switch.
Make sure the power adapter is properly connected to a functioning power outlet. If it's in
a power strip, make sure the power strip is turned on. If the socket is controlled by a light
switch, make sure the switch is in the on position.
Make sure you are using the NETGEAR power adapter supplied with your switch.
The Port number light is not lit for a connected device or
stays on continuously
There's a hardware connection problem.
Make sure the cable connectors are securely plugged in at the switch and the device.
Make sure the connected device is turned on.
If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure the card
or adapter is installed correctly and is working.
Make sure the cable is less than 328 feet (100 meters).

Technical Specifications

Standards Compatibility:
Network Interface:
Power:
Physical Dimensions:
Weight:
Operating Temperature:
Operating Humidity:
Electromagnetic Compliance:
Safety Agency Approvals for
the Power Adapter:
Performance Specifications
Frame Filter Rate:
Frame Forward Rate:
Network Latency:
(using 64-byte packets)
Address Database Size:
Addressing:
Packet Buffer Memory:
IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet,
1000BASE-T Gigabit Ethernet.
IEEE 802.3x Flow Control; Jumbo frame 9K, IEEE 802.1p priority, DSCP
priority, compatible with Windows
RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Ethernet interface
12 W max and 12 V @ 1A DC input
W: 158 mm (6.22") D: 101 mm (3.98") H: 27mm (1.0")
0.518 kg (1.14 lbs)
0 to 50° C (32 to 122° F)
10% t0 90% relative humidity, non-condensing
CE mark, Commercial; FCC Part 15, Class A; EN 55 022 (CISPR 22), C-Tick
CE mark, Commercial UL listed (UL 1950), C-Tick
14,800 frames/sec max for 10M port / 148,800 frames/sec max for
100M port/1,488,000 frames/sec for 1000M port
14,800 frames/sec max for 10M port / 148,800 frames/sec max for
100M port / 1,488,000 frames/sec max for 1000M port
100 Mbps to 100 Mbps: 40 µs max
1000 Mbps to 1000 Mbps: 10 µs max
4000 MAC addresses
48-bit MAC address
128 KB Embedded
®
, Mac
®
OS, NetWare
®
, Linux
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs108a

Table of Contents