Checks And Inspections - APRILIA TUONO R FACTORY 2007 Service Station Manual

TUONO R_FACTORY
Vi Purple

Checks and inspections

Dashboard
Immobilizer
The immobilizer system is integrated to the instrument panel electronic card. The card structure should
admit instrument panels without immobilizer or with the immobilizer function disabled, to be used in
countries where immobilizer systems are not allowed or not fitted.
The supplier shall be responsible for homologating the instrument panel immobilizer device according
to the regulations set by the Ministry of Post & Telecommunications of the different countries, and for
sticking the adequate system certification labels on the instrument panel.
Operation
Upon starting the vehicle the instrument panel will read the key code. If it corresponds to one of the
stored codes, the instrument panel will carry out the initial check and enable the vehicle start-up.
Up to four keys should be stored.
If the key code is not recognised, the instrument panel disables the vehicle start-up, the display shows
the request of the manual unlocking code; in this case the menu should be accessed through the di-
agnosis function.
Code
This function is used to manually unlock the immobilizer by entering a code. If the instrument panel
does not recognise the key inserted, entering the access code is requested, and the following message
is displayed:
•
Enter the code
The code must have 5 characters selected between 0-9. At the end of the line, the code will be empty
(five 0 digits or rather 00000) and it will be programmed by the user. If the code is not entered within
10 seconds, an alarm message is displayed:
•
Remember to enter the user code
This code can be modified by the user after re-entering of the old code, and if the user has lost the
access code, by means of a code entering procedure requiring inserting both keys the user has.
Programming keys at first start-up
The customer is provided with two keys, both with transponder in the handgrip. The instrument panel
requests programming the keys when it is turned on for the first time.
The display shows the following message:
•
Insert the X key
•
X+1 key programmed
Electrical system
ELE SYS - 55