Product Overview; Specifications - Toro 23106 Operator's Manual

Backhoe compact tool carrier
Table of Contents

Advertisement

Product Overview

1. Seat
2. Controls
3. Boom
Controls
Become familiar with all the controls
you start the engine and operate the traction unit.
1. Boom control lever
2. Left stabilizer control lever
3. Right stabilizer control
lever
Figure 4
4. Dipper
5. Bucket
6. Stabilizer (2)
(Figure
5) before
Figure 5
4. Dipper/bucket control
lever
5. E-stop button
Stabilizer Control Levers
Move the stabilizer control levers forward to lower the
stabilizers and backward to raise the stabilizers.
Boom Control Lever
Move the boom control lever forward to lower the
boom and backward to raise the boom. Move the
boom control lever to the right to swing the boom to
the right and move it left to swing the boom to the left.
You can also move the boom control lever into an
intermediate position (i.e., forward and left, forward
and right, backward and left, or backward and right)
to swing the boom at the same time as you raise or
lower it.
Dipper/Bucket Control Lever
Move the dipper/bucket control lever forward to extend
the bucket and backward to retract the bucket. Move
the dipper/bucket control lever to the right to dump the
bucket and move it left to load the bucket.
g348000
You can also move the dipper/bucket control lever into
an intermediate position (i.e., forward and left, forward
and right, backward and left, or backward and right) to
extend or retract the dipper at the same time as you
load or dump the bucket.
E-Stop Button
The backhoe has an e-stop button that shuts down
the machine when you press it.
You must be sitting in the seat to operate the backhoe;
otherwise, the e-stop button does not allow the
machine to run.
To manually start the machine after an emergency
stop, pull the emergency stop button up.

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
g352477
Length
Transport height
Weight
Digging depth (maximum)
Bucket rotation
Swing arc
Stabilizer spread (working)
Bucket capacity
7
87.6 cm (34.5 inches)
104 cm (41 inches)
180 cm (71 inches)
382 kg (843 lb)
208 cm (82 inches)
180°
180°
198 cm (78 inches)
0.7 ft
3

Advertisement

Table of Contents
loading

Table of Contents