Setup; Installing The Forks; Product Overview; Specifications - Toro 23175 Operator's Manual

Setup

Installing the Forks

1. Hang the upper hook of the fork over the center
of the frame and insert the bottom hook through
the bottom notch.
2. Pull up the knob and slide the fork to the desired
location. Release the knob.
3. Repeat the procedure for the other fork.
Figure 4
Figure 5

Product Overview

1. Fork
2. Adjustable-forks frame

Specifications

Note:
Specifications and design are subject to
change without notice.
Model 22586
g372887
Overall width
Overall length
Overall height
Weight
Fork length
Fork cross-section size
Fork width adjustment range
(outside to outside dimensions)
Model 23175
Overall width
Overall length
Overall height
Weight
Fork length
Fork cross-section size
Fork width adjustment range
(outside to outside dimensions)
g372889 Load Rating Capacity (per SAE J1197)
TX 1000
TX 1300—Loader arms
retracted
TX 1300—Loader arms
extended
All other models
6
Figure 6
3. Upper frame
91 cm (36 inches)
121 cm (48 inches)
75 cm (30 inches)
111 kg (244 lb)
91 cm (36 inches)
7.5 x 2.5 cm (3.0 x 1 inches)
29 to 79 cm (11 to 31 inches)
72.1 (28.4 inches)
118.1 cm (46.5 inches)
68.8 cm (27.1 inches)
82 kg (181 lb)
91 cm (36 inches)
3.0 x 8.1 cm (1.2 x 3.2 inches)
20 to 69 cm (8 to 27 inches)
272 kg (600 lb)
408 kg (900 lb)
226 kg (500 lb)
99 kg (220 lb)
g373061