Table of Contents
Advertisement
Assembly/Set up
STEP 9 BURNER ASSEMBLY
The cardboard packing
below the burners
cannot be easily
removed. It will burn
away during the first
use.
STEP 10 HOSE ROUTING
Route Burner Valve at end of
Hose through hole in cart end.
Insert Orifice Tube into burner,
then rotate valve until valve
stem goes through hole in side
table top.
NOTE: Valve must be inserted into
Burner Inlet.
Align screw holes of Valve
Bracket with holes in brace.
Install screws and tighten.
2 Required
Install Valve Knob on Valve
Stem.
10
(cont.)
(cont.)
Burner
STEP 11
GREASE PAN & GREASE TRAY
Note: Remove Grease Tray
and packing from rear of grill.
(This is the storage position of
the Grease Tray for shipping.)
Grease Pan attaches to Grease
Tray with slides.
Install Grease Pan as shown.
Slide Grease Tray into Grill.
Valve
Stem
Orifice
Tube
STEP 12 BURNER TENTS & GRATES
Place Burner Heat
Tents
TM
over
Burners as shown.
Install three (3)
Grates.
STEP 13 WARMING RACK
Install Warming Rack as shown.
Grease Tray
Grease Pan
Advertisement
Table of Contents
