Table of Contents
Advertisement
Assembly/Set up
STEP 14 BURNER TRIVET
Open Left Side Burner Lid and place
Trivet on Burner.
STEP 15 TOOL HOLDERS
4 Required
Tool
Hook
STEP 16 LOWER DOOR MAGNETS
2 Required
Lower Door
Magnets
Lower Shelf
STEP 17 UPPER DOOR MAGNETS
2 Required
Install Upper Door Magnets on Top Shelf as shown.
Upper Door
Magnets
(cont.)
Install Tool Holders onto front of
Left Side Burner and Right Side
Table.
Towel Bar
Install Lower Door Magnets on
Lower Shelf as shown.
Top Shelf
STEP 18 DOORS
Install Left and Right Doors.
Insert Bottom Door Pin into hole
on Bottom Frame.
Hinge Pins are spring-loaded.
Pull down to insert Hinge Pin into
Top Frame Hole.
NOTE: Make sure the 2 holes on
each Door are at the top when
installed.
Top Frame
Top Hinge Pin
STEP 19 DOOR HANDLES
Remove Screws from Handles.
Attach Handles to Doors as shown.
Tighten Screws.
STEP 20 ROTISSERIE
4 Required
Install Rotisserie Bracket as shown
to right end of grill. (Right Bracket
has larger offset.)
Install Rotisserie Bracket to left end
of grill.
Bottom Frame Hole
Bottom Door Pin
11
Advertisement
Table of Contents
