Adjustment Procedures; Service Fixture And Tools - Panasonic Lumix DMC-LC1PP Service Manual

9. ADJUSTMENT PROCEDURES

Although the repair of Main C.B.A. is separated, it needs the electrical adjustment and factory
setting when it is replaced the Main C.B.A., IC6004 (Flash-ROM) and related parts.
The electrical adjustment in this unit is separated two types as shown below.
(Concerning to the adjustment conditions and procedures, please use the "Adjustment Manual"
contained in "View 3" on the web-site.
1. Main unit adjustment: All adjustments except for LCD and EVF
adjustments.
This unit mounts the adjustment software for main unit, it
wouldn't need the connection between the PC and this unit with
USB cable.
2. LCD and EVF adjustment: Adjustments for LCD and EVF.
It need the connection between the PC and this unit with USB
cable.
(This adjustments needs the adjustment software contained in
"View 3".
The connection is shown to the figure below.

9.1. SERVICE FIXTURE AND TOOLS

The following Service Fixture and tools are used for checking and servicing this unit.
15