Kenwood DMX7022S Instruction Manual page 35

Settings Settings
<Time Alignment>
This setting improves the sound field for the seats you
select.
<Position>
You can select either <Listening Position> or <Front
Focus> on the screen. You cannot use both setting at
the same time.
<Listening Position>
This setting is used for both 2-way speaker system and
3-way speaker system.
1
Specify your favourite listening point.
1 Touch [Listening Position].
2 Select the listening position – [All] (Initial),
[Front L], [Front R] or [Front All]*.
3 Touch [Adjust].
Position
Listening Position Front Focus
Front L Front R
Front All All
Adjust
* [Front All] is selectable only when <X'over Network> is set
to [2 way].
2
Touch [Distance] (1), and then enter the
distance from your listening position to
each speaker (2).
106 cm
106 cm
0.00 ms
0.00 ms
106 cm
106 cm
0.00 ms 0.00 ms
Initialise
106 cmt
0.00 ms
3
Touch [Gain] (1), and then adjust the
sound level of each speaker (2).
Time Alignment
Tweeter
0.0 dB
Front L Front R
0 dB 0 dB
Rear L Rear R
0 dB 0 dB
Subwoofer
Initialise
0 dB
To initialise the setting value: Touch [Initialise].
Determining the delay time adjustment
If you specify the distance from the centre of your
listening position to every speaker, the delay time is
automatically computed and set.
E.g. When [Front All] is selected as the listening
position
60 cm
80 cm
150 cm
+0 cm
+90 cm
+70 cm
ENGLISH 33