Order Data - GEM 543 eSyStep Operating Instructions Manual

6 Order data

6 Order data
The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.
Order codes
1 Type
Angle seat globe valve, motorized,
eSyStep
2 DN
DN 6
DN 8
DN 10
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
3 Body configuration
2/2-way body
Angle valve body
4 Connection type
Spigot
Spigot DIN
Spigot EN 10357 series B,
formerly DIN 11850 series 1
Spigot EN 10357 series A (formerly DIN 11850 series
2)/DIN 11866 series A
Spigot SMS 3008
Spigot ASME BPE
Spigot ISO 1127/EN 10357 series C/DIN 11866 series B
Threaded connection
Threaded socket DIN ISO 228
Threaded socket Rc ISO 7-1,
EN 10226-1, JIS B 0203, BS 21,
end-to-end dimension ETE DIN 3202-4 series M8
Threaded socket NPT,
end-to-end dimension ETE DIN 3202-4 series M8
Threaded spigot DIN ISO 228
Flange
Flange EN 1092, PN 25, form B,
face-to-face dimension FTF EN 558 series 1, ISO 5752,
basic series 1
Flange EN 1092, PN 25, form B
Flange ANSI Class 150 RF
Clamp
Clamp ASME BPE,
face-to-face dimension FTF ASME BPE
Clamp DIN 32676 series B,
face-to-face dimension FTF EN 558 series 1
Clamp DIN 32676 series A,
face-to-face dimension FTF EN 558 series 1
GEMÜ 543 eSyStep
Code AE
Code 4 Connection type
543 Clamp ASME BPE,
face-to-face dimension FTF EN 558 series 1
Code 5 Valve body material
6 Investment casting material
8 1.4435, investment casting
10 1.4408, investment casting
15 1.4435, investment casting
20 Forged material
25 1.4435 (F316L), forged body
32
6 Seat seal
40
PTFE
50
PTFE, glass fibre reinforced
Code
1.4404
D
7 Voltage/frequency
E
24 V DC
Code
8 Control module
OPEN/CLOSE control, additional end position indicators
0
OPEN/CLOSE control, additional end position indicators,
16
configured for emergency power supply module (NC)
OPEN/CLOSE control, additional end position indicators,
17
configured for emergency power supply module (NO)
9 Regulating cone
37
59 Without
60 Please find the number of the optional regulating cone
(R-No.) for the linear or equal-percentage modified
regulating cone in the Kv value table.
1
3C 10 Type of design
Without
Ra ≤ 0.6 μm (25 μinch) for media wetted surfaces,
3D
in accordance with ASME BPE SF2 + SF3
mechanically polished internal
9
Ra ≤ 0.8 µm (30 µinch) for media wetted surfaces,
in accordance with DIN 11866 H3,
mechanically polished internal
10
Ra ≤ 0.4 μm (15 μinch) for media wetted surfaces,
in accordance with DIN 11866 H4, ASME BPE SF1
mechanically polished internal
13
Spindle seal PTFE-PTFE
47
11 Actuator version
80
Actuator size 0
Actuator size 0
82
seat diameter 9 mm
Actuator size 1
86
76 / 140
Code
88
Code
34
37
C2
40
Code
5
5G
10
Code
C1
Code
AE
A5
A6
Code
R....
Code
1903
1904
1909
2013
Code
0A
0E
1A
www.gemu-group.com