Siemens SIMATIC ET 200SP Manual page 26

Technical specifications
6.1 Technical specifications
Protocols
PROFIBUS DP master
Services
•
•
•
•
•
•
•
PROFIBUS DP slave
Transmission rate, max.
Automatic baud rate search
Address area, max.
User data per address area, max.
Services
•
•
•
•
•
Transfer memory
•
•
Interrupts/diagnostics/status information
Diagnostic alarms
Diagnostics
Diagnostic indicator LED
For module diagnostics
Electrical isolation
Between backplane bus and interface
Ambient conditions
Ambient temperature in operation
Horizontal installation, min.
Horizontal installation, max.
Vertical installation, min.
Vertical installation, max.
26
PG/OP communication
S7 routing
Data record routing
Isochronous mode
Constant bus cycle time
Number of DP slaves
Activation/deactivation of DP slaves
PG/OP communication
Routing
S7 communication
Direct data exchange (data exchange
broadcast)
DPV1
Inputs
Outputs
6ES7545-5DA00-0AB0
Yes
Yes
Yes
No
No
125
Yes
12 Mbps
Yes
120
128 bytes
Yes, only with active interface
Yes, only with active interface
Yes, only with active interface
Yes, no subscriber possible - only passive
publisher
Yes
244 bytes
244 bytes
Yes
Yes; green/red DIAG LED
Yes
0 °C
60 °C
0 °C
50 °C
Communication module CM DP (6ES7545-5DA00-0AB0)
Manual, 12/2014, A5E33619758-AB