Siemens SIMATIC ET 200SP Manual page 10

Product overview
2.1 Properties
Maximum configuration as DP Master
Table 2- 1
Feature
Number of operable DP slaves
Max. size of the input area over all DP slaves
Max. size of the output area via all DP slaves
Maximum number of inputs per DP slave
Maximum number of outputs per DP slave
Max. size of the consistency area for a module
Note
Setting the PROFIBUS DP address on the communication module CM DP
The communication module CM DP does not have a DIP switch. You set the PROFIBUS DP
address via STEP 7 (TIA Portal). You can find more information on this topic in the STEP 7
online help.
Accessories
A detailed list of the available accessories can be found in the system manual ET 200SP
distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).
Additional information
You can obtain detailed information on the topic of PROFIBUS in the function manual
PROFIBUS (http://support.automation.siemens.com/WW/view/de/59193579/0/en)
10
General characteristics of DP mode
Explanation/values
125
8 KB
8 KB
244 bytes
244 bytes
128 bytes
Communication module CM DP (6ES7545-5DA00-0AB0)
Manual, 12/2014, A5E33619758-AB