Planet IGS-824UPT User Manual page 10

1. To avoid damage, please use the Industrial PoE++ Switch
according to its specifications.
2. Please follow the table above for DC input in relation with
Note
maximum PoE budget.
2. Tighten the wire-clamp screws for preventing the wires from loosening.
The wire gauge for the terminal block should be in the range
between 12 and 24 AWG.
Note
PWR1 and PWR2 must provide exactly the same DC voltage
for power load balance while operating with dual power input.
10
DC Input
48~51V
52V~54V
1 2 3
Power 1 Alarm
+ -
Max. PoE Budget
160W
240W
4 5 6
Power 2
+ -