Table of Contents
Advertisement
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned by
JVCKENWOOD Corporation. FleetSync enables a variety of paging functions on
your transceiver, some of which depend on dealer programming.
Note:
◆ This function is available only in analog operation.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
Transmitting
1
Select your desired zone and channel.
2
Press the button programmed as [Individual]/ [Individual + Status]/
[Individual + Short Message]/ [Group]/ [Group + Status]/ [Group + Short
Message] to enter Selcall Mode.
Alternatively, press the button programmed as [Menu] to enter Selcall
•
Mode using Individual/ Individual + Status/ Individual + Short Message/
Group/ Group + Status/ Group + Short Message in the Menu Mode.
3
Press the [ <B ] and [ C> ] buttons to select the station you want to call.
4
Press the PTT switch and begin your conversation.
Receiving
An alert tone will sound and the transceiver will enter Selcall mode. The calling
station's ID will appear when a Selcall is received. You can respond to the call by
pressing the PTT switch and speaking into the microphone.
Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver has its own ID.
•
Enter a Fleet number (100 ~ 349) to make a fleet call.
•
Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.
•
Enter a Group ID (which is programmed in the FPU) to make a group call.
•
Enter a Fleet number followed by an ID number to make an individual call in
your desired fleet (Inter-fleet call).
•
Select "ALL" Fleet and "ALL" ID to make a call to all units (Broadcast call).
•
Select "ALL" Fleet and enter an ID number to make a call to the selected ID in
all fleets (Supervisor call).
79
Hide quick links:
Advertisement
Table of Contents
