Kenwood NX-1800HNU User Manual page 54

Public Address
This function for enables the transceiver to be used in place of a megaphone.
Pressing and holding the PTT switch while Public Address is enabled causes
the audio spoken into the microphone to be emitted from the external speaker
for Public Address that is connected to the rear panel of the transceiver. At this
time, the received audio is emitted from the internal speaker of the transceiver.
If the speaker is connected to a SP Jack, the received audio is emitted from the
connected speaker.
PF Button:
Press the programmed button to change the Public Address On or Off.
Menu Mode:
Select "PUBLIC ADR" and press the [ S ] button to activate/ deactivate the Public
Address.
• The " " indicator appears on the display.
• The " " indicator blinks while paused.
Note:
◆ Public Address cannot be used with External Speaker at the same time.
[Analog/ NXDN/ DMR]
54