Table of Contents
Advertisement
RECEIVING
1
Select the desired zone and channel. (If the Scan function has been
programmed, you can switch it On or Off as desired.)
2
When you hear the caller's voice, readjust the volume as necessary.
•
If signaling has been programmed on the selected channel, you will hear a
call only if the signaling matches the signaling set up on your transceiver.
Refer to "OPTIONAL SIGNALING"
•
In Site Roaming zones, the transceiver will automatically search for the
strongest signal and receive on that frequency.
Note:
◆ A ringing tone will sound when receiving a call if the alert tone has been
enabled in the Alert Tone setting. For details, consult your dealer.
Receiving Group Calls (NXDN/ DMR)
When you receive a group call on a channel and the received group ID matches
the ID set up on your transceiver, you can hear the caller's voice.
Receiving Individual Calls (NXDN/ DMR)
When you receive an individual call on a channel, a ringing tone will sound and
the display will show the caller's ID.
{page
78} for details.
18
Hide quick links:
Advertisement
Table of Contents
