Kenwood NX-1800HNU User Manual page 78

OPTIONAL SIGNALING
Your dealer may also program several types of optional signaling for your
transceiver channels.
2-tone Signaling [Analog]
2-tone Signaling opens the squelch only when your transceiver receives a call
containing a matching 2-tone signal.
1 Press the button programmed as [2-tone].
Alternatively, you can press the button programmed as [Menu] to enter
•
2-tone Mode using the Menu Mode.
2 Press the [ <B ] and [ C> ] buttons to select your desired list of 2-tone codes.
3 Press the PTT switch or [
5-tone Signaling [Analog] (For E type only)
Refer to "5-TONE SIGNALING (For E type only)"
DTMF Signaling [Analog]
DTMF Signaling opens the squelch only when the transceiver receives a call
containing a matching DTMF code.
MDC-1200 Signaling [Analog]
MDC-1200 is a data system using Audio Frequency Shift Keying (AFSK).
FleetSync Signaling [Analog]
FleetSync Signaling opens the squelch only when the transceiver receives a
call that matches the FleetSync ID in FleetSync Signaling. Refer to "FleetSync:
ALPHANUMERIC 2-WAY PAGING FUNCTION"
NXDN ID Signaling [NXDN]
NXDN ID is an optional signaling system available only for digital communications.
] button to make the call.
78
{page 81}.
{page 79}.