General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PBSA 12 E4 Translation Of The Original Instructions

General description
The illustrations are on the
fold-out page.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- Storage case
- 8 Screw bits, length 50 mm:
Cross recess: PH0, PH1, PH2, PZ0,
PZ1, PZ2
Recess: SL5, SL6
- 8 drill bits: 1.5 mm, 2.5 mm, 3 mm,
4 mm, 5 mm, 6 mm, 8 mm, 10 mm
- Bit holder, length 60 mm
- Instruction Manual
Battery and charger are not inclu-
ded.

Overview

1 Keyless drill chuck
2 Chuck ring
3 Torque adjustment ring
4 Battery Indicator
5 Speed selector
6 Direction of rotation switch
7 On/off switch
8 LED working light
9 Drill chuck aperture
10 Battery
11 Battery release button
12 Storage case
13 Charger
14 Screw bits
15 Bit holder
16 Drill bits
17 Bitholder
18 Magnetic bit holder
Functional description
The cordless drill with two-speed gearing
has a 19+1 level torque adjustment, left/
right running, a removable keyless chuck,
a 6-point bitholder and an LED working
light.

Technical data

Cordless Drill ................ PBSA 12 E4
Motor voltage U .......................... 12 V
Idling speed n
0
1st gear .............................0-350 min
2nd gear .........................0-1300 min
Maximum torque .......................... 28 Nm
Span-chuck Ø ........................ 0.8-10 mm
Weight .................................. ca. 0.8 kg
Weight (accessories only) ......... ca. 0.9 kg
Drilling capacity
for wood .......................... max. 25 mm
for steel ........................... max. 10 mm
Sound pressure level
) ................... 70.1 dB(A), K
(L
pA
Sound power level
) ................. 81.1 dB(A); K
(L
WA
)
Vibration (a
h
Drilling in metal .................. < 2.5 m/s
Screwdriving ...................... < 2.5 m/s
Temperature.......................... max. 50 °C
Charging process .................. 4 - 40 °C
Operation ..........................-20 - 50 °C
Storage ................................ 0 - 45 °C
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
GB MT
-1
-1
= 5 dB
pA
= 5 dB
WA
2
2
K= 1.5 m/s
2
19