Data Ports And Leds In The Rear Of The Control - IBM Storwize V7000 Quick Installation Manual

1
Figure 3. Rear view of a control enclosure
v Power supply units are located on the left and right of the canisters. Each unit contains a battery.
Power supply 1 1 is located on the left. Power supply 2 2 is located on the right. Power supply 1
is inserted top side up, and power supply 2 is inverted, or top side down.
Important: The power supply units for the control enclosure and expansion enclosure are not
interchangeable.
v Two canisters are housed in the middle of the enclosure. Each canister is known as a node canister. The
upper canister is canister 1 3 , and the lower canister is canister 2 4 . Canister 1 is top side up, and
canister 2 is inverted, or top side down.
Figure 4 shows the rear view of a control enclosure and identifies the location of the ports.
Figure 4. Data ports and LEDs in the rear of the control enclosure
4
Storwize V7000 Version 6.1.0: Quick Installation Guide
3
4
1 2
4 3
2
3 4
2 1