Table of Contents
Advertisement
Figure 5. SAS ports and LEDs in rear view of a Storwize V7000 expansion canister
Expansion enclosure support rails
The left and right expansion enclosure support rails (Figure 6) are designed
specifically for installation of an expansion enclosure.
v The ledge on the inside of each rail supports the entire length of an expansion
v The expansion enclosure support rails capture the left and right rear edges of an
v The expansion enclosure support rails adjust to fit racks from 595 mm to 755
Figure 6. Expansion enclosure support rails on Storwize V7000
Identifying Storwize V7000 2076-624 node canisters
The Storwize V7000 2076-624 node canister includes hardware changes from the
Storwize V7000 2076-524 node canister. The changes can facilitate distinguishing
between the two node canisters.
enclosure.
inserted expansion enclosure. This prevents the installed control enclosure
bouncing when the rack is subjected to quake or vibration.
mm deep, measured between the front and rear rack rails.
1
2
Chapter 1. Before you begin the installation
9
Advertisement
Table of Contents
