Table of Contents
Advertisement
A
Make sure the levers are in their
original position before closing the
door.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
You cannot activate the appli-
ance.
B
Possible cause
The appliance is not connected
to an electrical supply or it is
connected incorrectly.
REPLACING THE LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
Check if the appliance is cor-
rectly connected to the electri-
cal supply.
Remedy
21
Advertisement
Table of Contents
