Removing The Shelf Supports; Cleaning The Oven Door - Zanussi ZCG92696XA User Manual

Table of Contents

Advertisement

WARNING! Be careful while cleaning
the kebab shelf. The kit is heavy.
Clean stubborn stains with a special oven cleaner.
Do not clean the non-stick accessories using
abrasive cleaner or sharp-edged objects.
STAINLESS STEEL OR ALUMINIUM OVENS
Clean the oven door with a damp cloth or sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials
as they can damage the oven surface. Clean the
oven control panel with the same precautions.

REMOVING THE SHELF SUPPORTS

To clean the oven, remove the shelf supports.
CAUTION! Be careful when you
remove the shelf supports.
1. Pull the front of the shelf support away from the
side wall.
2. Pull the rear end of the shelf support away from
the side wall and remove it.
1
Install the removed accessories in the opposite
sequence.

CLEANING THE OVEN DOOR

The oven door has two panels of glass installed
one behind the other. To make the cleaning easier
remove the oven door.
WARNING! The oven door can close
if you try to remove the internal panel
of glass when the door is still
assembled.
2
Do not loosen the screws.
1. Open the door fully.
2. Lift and turn the levers on the two hinges till
they stop (until you reach the pins).
Avoid placing the levers in the vertical
position and make sure both of them
are pulled maximally towards you.
19

Advertisement

Table of Contents
loading

Table of Contents