Zanussi ZCG92696XA User Manual page 14

Push the tray or deep pan between the guide bars
of the shelf support. Make sure it does not touch
the back wall of the oven.
USING THE MOTORIZED KEBAB SHELF
WARNING! Be careful when you use
the turnspits of the kit. The forks and
the spit are sharp. There is a risk of
injury.
WARNING! Use oven gloves when
you remove the kebab shelf. The shelf,
box, turnspit and grill are hot. There is
a risk of burns.
CAUTION! For the weight permitted
on each turnspit refer to "Oven - Hints
and tips" chapter, Cooking tables.
A B
A. Kebab shelf kit
B. Connection spit
C. Forks
D. Spit
E. Handle
14
C
D
E
WARNING! Make sure there is no
spit handle inside the oven before
operation.
1. Open the oven door.
2. Put the baking tray on the lowest shelf level.
3. Put the kebab shelf on the shelf position 4 and
push it to the end.
Refer to "Product description" chapter.
4. Assemble the spit handle E to the motor
connection spit B.
5. Assemble the motor connection spit in the
oven, then remove the plastic handle from it.
1
6. Close the oven door.
7. Turn on the grill function for preheating
preheating time refer to "Oven - Hints and tips"
chapter, Cooking tables.
8. Put the chicken pieces, meat or kofta on the
spit D.
Make sure that the meat is in the middle of the
spit.
9. Open the oven door.
10. Wear the oven gloves.
11. Put the spit into the holes in the kebab shelf A
then rest the spit at the end of the shelf.
12. Remove the turnspit handle E from the spit D.
13. Repeat two last steps for the desired number
of spits (max.6).
2
3
. For
1
2