Table of Contents
Advertisement
No. Security
1
Change PINs
Changes the PIN or PIN2 code (PIN activate setting must be turned on to change the PIN code).
2
PIN activate
Turns on/off the PIN code entry required at starting up the phone.
3
Change
Changes the security code which is used to set some of functions and unlock the Personal Information Manager (PIM)
security code
features.
The default setting of the security code is "0000".
4
Phone lock
Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter the security
code. After entering the correct security code, you can use the phone normally.
Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was
powered down.
5
Bar calls
You can bar the following calls made/received on your phone: all outgoing (dialled) calls, international outgoing (dialled)
calls, international outgoing (dialled) calls except to home, all incoming (received) calls or Incoming (received) calls
when roaming.
Bar calls facilities are network services and may require a password.
1
Change settings
2
Set password
6
Fixed dialling Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers (FDN).
The FDN facility is network dependent.
See also: "Fixed dialling numbers (FDN)" on page 49.
Network (M18)
☛
1 8
For settings provided on the Network screen, see "Roaming" on page 14.
Reset settings (M19)
☛
1 9
This function will reset your phone to its factory settings.
☛
Highlight the type of restriction and the call type, and then
☛
Key in your bar calls password to verify user identification to the network
confirm and save changes to the network.
The selected settings have red bars over their icons.
Changes the bar calls password.
➔
to save changes.
➔
SK1 to
25
Settings (M1)
Advertisement
Table of Contents
