Table of Contents
Advertisement
When you change this setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No. Phone mode setting
1
Ringer
Selects the Sound or Video for incoming calls. (See "Sounds (M62)" on page 62 or "Videos (M61)" on page 62 for
details.)
2
Ringer volume
Sets the sound volume for incoming calls.
3
SMS tone
Selects the ringtone for incoming SMS messages. (See "Sounds (M62)" on page 62 for details.)
4
SMS tone volume
Sets the sound volume for incoming SMS messages.
5
Mail tone
Selects the ringtone for incoming Mail or MMS messages. (See "Sounds (M62)" on page 62 for details.)
6
Mail tone volume
Sets the sound volume for incoming Mail or MMS messages.
7
Key tone
Turns on/off the key tone.
8
Service tone
Turns on/off the service tone.
9
Alarm volume
Sets the sound volume for Clock alarm and Schedule alarm.
0
Vibrator
Turns on/off the vibrator function.
Earphone setting
Selects the sound output from Earphone & Speaker or Earphone.
#
Auto answer
Selects whether to answer an incoming call automatically.
If the selected mode is Car mode, the backlight will always be turned on. This will accelerate the battery consumption.
Settings (M1)
22
If the Video is set, it will sound and will be displayed regardless of the CLI picture setting for the personal data
in Phonebook. (See "Allocating a picture as a CLI" on page 53.)
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired
headset and the speaker of the phone are saved individually.
While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker
of the phone is used.
This option affects the wired headset.
To use the Auto answer function, connect the headset to your phone and set the earphone volume to 1 or
higher. If the earphone volume is set to 0, you must turn the vibrator ON to use the Auto answer.
The Auto answer function only applies to the first incoming call. When you have another incoming call, you
have to answer it manually.
Advertisement
Table of Contents
