NEC N411I - MANUAL 2 User Manual
NEC N411I - MANUAL 2 User Manual

NEC N411I - MANUAL 2 User Manual

Nec n411i: user guide
Hide thumbs Also See for N411I - MANUAL 2:
Table of Contents

Advertisement

Quick Links

Emergency Services and Safety
Precautions
Emergency Services
To make an emergency call in any country
Press 1 1 2
.
Ask the operator for the service which you require: Police, Ambulance, Fire Brigade,
Coastguard or Mountain Rescue Services. Give your position and, if possible, remain
stationary to maintain phone contact.
The 112 emergency number service is available on every digital network service. The
number 999 is an alternative emergency number for the UK only, and can only be used
with a valid SIM card.
Due to the nature of the cellular system, the success of emergency calls cannot be
guaranteed.
General Care
A cellphone contains delicate electronic circuitry, magnets, and battery systems. You
should treat it with care and give particular attention to the following points.
Do not allow the phone or its accessories to come into contact with liquid or moisture
at any time.
Do not place anything in the folded phone.
Do not expose your phone to extreme high or low temperatures.
Do not expose your phone to naked flame, cigars or cigarettes.
Do not paint your phone.
Do not drop or subject your phone to rough treatment.
Do not place the phone alongside computer disks, credit cards, travel cards and other
magnetic media. The information contained on disks or cards may be affected by the
phone.
Do not leave the phone or the battery in places where the temperature could exceed
60°C; e.g. on a car dashboard or on a window sill, behind glass in direct sunlight, etc.
Do not remove the phone's battery while the phone is switched on.
Take care not to allow metal objects, such as coins or key rings, to contact or
short-circuit the battery terminals.
Do not dispose of battery packs in a fire. Your phone's Li-ion batteries may be safely
disposed of at Li-ion recycling points. For more specific battery and power supply
information, see page 3.
Do not put your phone's battery in your mouth as battery electrolytes may be toxic if
swallowed.
Do not attempt to dismantle the phone or any of its accessories.
This equipment is fitted with an internal battery that can only be replaced by a qualified
service engineer. There is a risk of explosion if the battery is replaced by an incorrect
type. Dispose of the used battery in accordance with the manufacturer's instructions.
Using any battery pack, AC adapter, Vehicle power adapter (option) or accessory not
specified by the manufacturer for use with this phone creates a potential safety hazard.
The earpiece may become warm during normal use and the unit itself may become
warm during charging.
Use a damp or anti-static cloth to clean the phone. Do NOT use a dry cloth or
electrostatically charged cloth. Do not use chemical or abrasive cleaners as these
could damage the case.
Remember to recycle: the cardboard packaging supplied with this phone is ideal for
recycling.
Do not leave the battery pack empty or disconnected for a long time, otherwise some
data may be initialized.
Your phone contains metal which may cause you an itch, a rash or eczema depending
on your constitution or physical condition.
Take care not to put your phone in the back pocket of your trousers or skirt and then
sit on it. Also, do not put your phone at the bottom of bag where it may subject to
excessive weight or pressure.
Doing so may damage the LCD and camera lens and cause them malfunction.
Take care not to hold the Light too close to your or other people's eyes when the Light
is lit.
Do not aim or direct the InfraRed (IR) data port towards your or other people's eyes
when using the IR data exchange.
The foam covers the earpiece of the headset. Do not put any other part of the headset
in your ears.
Aircraft Safety
Switch off your phone and remove its battery when inside or near aircraft. The use of
cellphones in aircraft is illegal. It may be dangerous to the operation of the aircraft and
it may disrupt the cellular network. Failure to observe this instruction may lead to
suspension or denial of cellphone service to the offender, or legal action, or both.
Do not use your phone on the ground without the permission of the ground crew.
Hospital Safety
Switch off your phone in areas where the use of cellphones is prohibited. Follow the
instructions given by the respective medical facility regarding the use of cellphones on
their premises.
General Safety
Observe 'Turn off 2-way radio' signs, such as those near stores of fuel, chemicals or
explosives.
Do not allow children to play with the phone, charger or batteries.
Small parts are included in your phone. Keep them out of reach of small children, for
whom it could be a choking hazard.
The operation of some medical electronic devices, such as hearing aids and
pacemakers, may be affected if a cellphone is used next to them. Observe any warning
signs and manufacturer's recommendations.
If you have a weak heart, you should take extra precautions when setting functions
such as the Vibrator and Ringer volume functions for incoming calls.
If you set the Vibrator setting to anything other than OFF, be careful that the phone is
not near a source of heat (e.g. a heater) and that it does not fall from a desk due to the
vibration.
Road Safety
You MUST exercise proper control of your vehicle at all times. Give full attention to
driving.
Observe all the recommendations contained in your local traffic safety documentation.
Pull off the road and park before making or answering a call if driving conditions so
require.
Emergency Services and Safety Precautions
i

Advertisement

Table of Contents
loading

Summary of Contents for NEC N411I - MANUAL 2

  • Page 1 Emergency Services and Safety Precautions Emergency Services To make an emergency call in any country ☛ Press 1 1 2 Ask the operator for the service which you require: Police, Ambulance, Fire Brigade, Coastguard or Mountain Rescue Services. Give your position and, if possible, remain stationary to maintain phone contact.
  • Page 2: Emergency Services And Safety Precautions

    Third Party Equipment The use of third party equipment, cables or accessories, not made or authorized by NEC, may invalidate the warranty of your cellphone and also adversely affect the phone’s operation. For example use only the NEC mains cable supplied with the AC charger.
  • Page 3 ® The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by NEC is under license. Other trademarks and trade names are those of their respective owners. • This product contains ACCESS CO., LTD's IrFront® Infrared communication software.
  • Page 4: Menu Shortcuts Selection

    Before You Start User’s manual conventions The instructions in this user’s manual make use of the shortcuts selection except special cases. The following markers are used throughout the user’s manual to attract your attention: This type of paragraph will contain details of where to find information related to the topic in question. This type of paragraph will contain information worth noting.
  • Page 5: Display Information

    Display information Desktop icon area This area contains the automatically displayed and the manually created desktop icons. They provide shortcuts to certain items/functions. Help area This area contains clock information and help information appropriate for the current screen (e.g. key presses SK1/SK2 remaining when This area contains context...
  • Page 6: Parts And Functions

    Parts and functions Side up key Softkey 1 (SK1) MENU ( ) key Celar (CLR)/Back key Side down key Send ( ) key Be careful not to put your finger or foreign objects in the hinge of the phone when your phone is opened. Before You Start Earpiece Main-LCD...
  • Page 7: Keypad Shortcuts

    Keypad shortcuts The following operations are available from the standby screen. Operation that involves pressing a key Accessing the Main menu screen Accessing the Mail screen Accessing the i-mode menu screen Accessing the Phonebook list screen ▲ Accessing the Phone modes screen ▼...
  • Page 8: Lcd And Displayed Icons

    LCD and displayed icons Main-LCD Indicates the battery level. Indicates the battery charging status (fast, slow, stop). Indicates that there is a new SMS in your phone. Indicates that there is a new SMS on the network. Indicates that the SIM memory is full. Indicates that the Inbox in your phone is full.
  • Page 9 Indicates that a Java™ application is in operation. <When the camera/video view finder is in operation> Indicates single/burst mode (camera). Indicates the video mode is on or the video is recording. Indicates that the self timer is on. Indicates the quality of the picture (super fine, fine, normal, economy or super economy).
  • Page 10: Overview Of Menu Function

    Overview of menu function Standby screen Main menu screen ➡ ➡ ➡ ➡ Main menu Second level menu Settings Phone Phone modes Main-LCD 2nd-LCD Power saving Calls Security Network Reset settings Message Inbox Drafts Outbox Sent Folder1 Folder2 Before You Start The Main menu has a set of icons for its top levels of options which can be selected either using a combination of the 4-way navigation key (▲...
  • Page 11 Getting Started Basic Calls & Phone Use Text Entry Desktop icons Settings (M1) Message (M2) i-mode (M3) Phonebook (M4) Camera (M5) My data (M6) Java™ (M7) Accessory (M8) Bluetooth (M891) IR Data Exchange Index...
  • Page 12: Table Of Contents

    Emergency Services and Safety Precautions Before You Start User’s manual conventions... iv Display information ... v Parts and functions ... vi LCD and displayed icons ...viii Overview of menu function ... x Getting Started Preparing the phone ... 1 Standby and talk times ... 4 Checking the battery ...
  • Page 13 Reading a message (M21)...27 Creating a message...30 Cell broadcast (M27)...32 i-mode (M3) i-mode operation guide ...32 i-mode screen ...36 i-mode menu screen ...37 iMenu screen ...39 Mail screen...40 i-mode glossary...44 Phonebook (M4) Phonebook types ...45 Accessing your phonebook (M4) ...46 Phonebook list Options menu ...46 Personal data Options menu ...50 Voice mail (M417) ...51...
  • Page 14 Memo Memo...
  • Page 15: Getting Started

    Getting Started Preparing the phone Before trying to use your phone, make sure that a valid Subscriber Identity Module (SIM) card is inserted and the battery is charged. SIM card Before using your phone, you must sign-up with one of the digital network service providers. In addition to your subscription details you will receive a personal SIM (Subscriber Identity Module) card which is inserted into your phone.
  • Page 16: Removing A Sim Card

    Battery Rear cover About 3 mm If the SIM card is not fully inserted when the battery is replaced, damage to the SIM card can occur. If the SIM card is already fitted, see “Start-up” on page 4. Removing a SIM card ☛...
  • Page 17: Charging The Battery

    Charging the battery Before trying to use your phone, insert the phone’s battery, and connect the NEC battery charger (AC adapter) supplied with your phone to a suitable mains power socket. ☛ Pull open the charger connector cover gently. Be careful when handling the charger connector cover. Do not pull strongly.
  • Page 18: Standby And Talk Times

    IMPORTANT BATTERY CHARGING INFORMATION Charging a very low battery The battery’s charge continues to drop after the low battery warning is displayed. In extreme cases where the battery is left uncharged for some considerable time after this warning, a trickle charge is used to slowly top-up the battery to the safe level at which the fast charging can begin. The phone can be in trickle charge for a few minutes before the fast charging starts.
  • Page 19: Basic Calls & Phone Use

    Switching the phone off ☛ Hold down until the display shows the switch off message. PIN code The SIM card issued by your service provider has a security feature called PIN code protection. The Personal Identification Number (PIN) is a number put on to the card by your service provider, and is 4 to 8 digits long.
  • Page 20: Receiving An Incoming Call

    When you use the headset, you can also end a call by pressing and holding the button on it. When connecting a wired headset and Bluetooth headset, the wired headset will not work. You cannot end a call by closing your phone when the headset is connected. Receiving an incoming call When someone calls your number, the ringer will play (if set - see page 21), the LED glows in the specified colour, and the phone number of the caller may be displayed if the calling line identification facility is available and the caller has activated the feature.
  • Page 21: Unsuccessful Calls

    Unsuccessful calls If dialled call is not successfully connected, the display will give an appropriate message. If your phone has the auto redial function activated, the number will be automatically called again after a short delay (see page 13). Emergency calls The standard emergency number of 112 can be used.
  • Page 22: Displaying Your Own Phone Number (M0/M416)

    Displaying your own phone number (M0/M416) ☛ 0 or 4 1 6 Voice recall You can store up to 10 voice recall recordings which can be allocated to a personal data stored in the phonebook (Phone). To store the voice recall sound, see page 49.
  • Page 23: Putting A Call On Hold

    Putting a call on hold ☛ To put the received or dialled call on hold, SK1 or Mute You can mute the sound from the mouthpiece during a call. When your call is muted, the other party cannot hear any sound from your phone, but you can still hear the sound from the other party.
  • Page 24: Making A Private Call

    Making a private call While on the multi-party call, you can make a private call to a specific party. ☛ To make a private call, highlight the desired party you want to make a private call to ☛ To end a private call and return to the normal multi-party call While you are on a private call, other parties can continue with their conversation.
  • Page 25 ☛ 4 3 to display the Call options screen. No. Call options Missed calls Displays the list of missed calls. You can also access this function by pressing Received calls Displays the list of received calls. You can also access this function by pressing Dialled calls Displays the list of dialled calls.
  • Page 26: Call Settings (M16)

    No. Missed calls/Received calls/Dialled calls Options menu Call Calls the current number. Create message Creates a new message to the highlighted phone number. Add to phonebook Adds the current number to the phonebook. ☛ 1 to add it as a new personal data, 2 to add it to an existing personal data the storage destination number to.
  • Page 27 Call diversion edit options menu ☛ ➔ Highlight the required edit field No. Call diversion edit options menu Copy Copies the number in the edit field. Paste Pastes the previously copied number. Disable all Disables the numbers from all the fields. Phonebook Displays the phonebook to insert a number in the edit field.
  • Page 28: International Dialling Codes

    Line ID (M164) The line ID (identification) facility is network dependent. The line ID facility enables you to choose whether or not to send your own phone number when you make a call and also whether or not to display a caller’s phone number when you receive a call. ☛...
  • Page 29: Text Entry

    Viewing/editing network list (M183) Before editing your network list, please consult with your service provider. ☛ 1 8 3 to read the network list in the SIM memory No. SIM list Options menu Adds a new network to the list. Move Moves the highlighted network within the list.
  • Page 30: Normal Text Input

    ☛ 4 6 6 3 to display “good”, and then 0 to confirm and the sentence is completed. Function Confirms a word and inserts a space. Inserts a period or a single quote as in “Let’s”, “we’re”, “it’s”, etc. SK1(List) Displays the list of other matching words.
  • Page 31: Numeric Input

    If you have made a mistake, use ▲ ▼ see page 32 for details) and then CLR. When entering normal (ABC) text, and the character you require is displayed, use 1 second, the cursor will move one character to the right automatically). Numeric input ☛...
  • Page 32: Desktop Icons

    Desktop icons Desktop icons are shortcuts to functions or items. You can activate a desktop icon on the standby screen (desktop) in stead of following the menu and pressing the shortcut numbers. The desktop icons are displayed in two rows on the standby screen. See “LCD and displayed icons” on page viii for the actual location of the desktop icon area.
  • Page 33 Creating a desktop icon manually ☛ Highlight the required function (Camera/Video/MP3 player/Calculator/Clock alarm/Scheduler/ToDo list/Notepad/Voice memo/Currency/Bluetooth) or display the item (image file/note file/phone number/Email address/URL). ☛ For functions, SK1 ☛ For items, to display the Options menu and select Add desktop icon (for an image/note file, this menu is under Use item) For Camera/Video/MP3 player, you can also display the Options menu and select Add desktop icon (for Camera/Video, this menu is under Other settings).
  • Page 34: Settings (M1)

    Settings (M1) Phone (M11) ☛ Phone Voice Adjusts the sound volume output from the earpiece. volume ☛ Use ▲ ▼, Side keys or alphanumeric keys (0 to 9) to adjust the volume. You can also press the Side keys to display the volume control screen and to adjust the volume setting. During a call, you can press the Side keys to adjust the setting of the volume as required.
  • Page 35: Phone Modes (M12)

    Phone Language Selects the language the phone displays. When you have switched the language to be displayed, please wait until the new setting becomes active. Selects the Light Emitting Diode (LED) colour for incoming calls/SMS/Mail or during a call. If the personal setting or the Group setting for the LED colour is also set in the phonebook, it has priority over this LED setting. (See “Allocating a LED colour”...
  • Page 36: Main-Lcd (M13)

    Phone mode setting SMS tone Sets the sound volume for incoming SMS messages. volume Mail tone Selects the ringtone for incoming Mail or MMS messages. (See “Sounds (M62)” on page 58 for details.) Mail tone volume Sets the sound volume for incoming Mail or MMS messages. Key tone Turns on/off the key tone.
  • Page 37: 2Nd-Lcd (M14)

    2nd-LCD (M14) ☛ No. 2nd-LCD Clock/Event display Selects which items to display on the 2nd-LCD from Clock & Event, Clock only, Event only or Off. Wallpaper Selects a picture file to use as the background for the 2nd-LCD. Clock selection Selects the type of clock to be displayed on the 2nd-LCD.
  • Page 38: Security (M17)

    Security (M17) ☛ The security settings will help to protect your phone from improper and unauthorized use. You may be required to enter one of the five codes (shown below). When the phone prompts you for one of these codes, key in the appropriate number. •...
  • Page 39: Network (M18)

    Security Bar calls You can bar the following calls made/received on your phone: all outgoing (dialled) calls, international outgoing (dialled) calls, international outgoing (dialled) calls except to home, all incoming (received) calls or Incoming (received) calls when roaming. Bar calls facilities are network services and may require a password. Change settings Set password Fixed dialling Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers (FDN).
  • Page 40: Message (M2)

    Message (M2) Message overview Message services Your phone supports the following messaging services: • Short Messaging Service (SMS) allows you to send short messages (160 half-pitch characters max.) to one or more phone numbers. To send an SMS message, the destination phone number must be a mobile phone with an SMS service subscription. SMS service also supports Enhanced Messaging Service (EMS) for which the maximum length of the message you can send depends on the number of linked messages (maximum of 10 linked messages are available).
  • Page 41: Reading A Message (M21)

    No. Message screen menu (Continued) 5, 6 Folder1/Folder2 The messages moved by Move msg (see “Message list Options menu” on page 28) are stored here. The received broadcast messages are saved. See “Cell broadcast (M27)” on page 32 for details. If there is no message in a message list, the list will be displayed in gray and you cannot select it.
  • Page 42 No. Message Options menu (Continued) SMS settings 4 Max linked msgs (Continued) 5 Validity period CB settings 1 Enable 2 Languages View msg status Displays the information on the number of messages in the phone, the size of free/used memories, SMS units in the phone/ SIM, and complete/incomplete SMS units.
  • Page 43: Message View Options Menu

    No. Message list Options menu (Continued) – Add desktop icon Creates a desktop icon of the sender or recipient of the highlighted message (Inbox, Sent, Folder1, Folder2, and Drafts only). – Edit Edits the highlighted message (Drafts and Outbox only). –...
  • Page 44: Creating A Message

    Option mode Options menu – Add to phonebook – – Dial phone number – – Add to bookmark – – Go to URL Create message – Add desktop icon View mode Creating a message Help area This area contains the information on the message.
  • Page 45 No. Message composer Options menu Preview msg Displays a message preview screen. Delete Deletes the highlighted recipient, message, or object. Delete all Deletes all the recipients. Save Saves the message in Drafts folder. Phonebook Displays the phonebook list to insert a recipient phone number. Resend list Inserts a phone number from the resend list.
  • Page 46: Cell Broadcast (M27)

    No. Message edit Options menu Highlight mode Select all (Continued) Save to text file Insert object Inserts Text, Sound, Still image, Animation, Emoticon, or Pictograph into the message at the cursor position. T9 Language Selects the language for T9 Edit settings Sets the Write mode (Insert or Overwrite) and Clear mode (Backspace or Delete).
  • Page 47 Action Procedure Bookmark a web page Display a bookmarked web page Save a web page Display a saved page Save an image Save a phone number Display the certificate information of the current page Download a file Returning to the previous screen/ moving forward to the next screen Mail/MMS Create a mail...
  • Page 48 To send the mail to more than one addressee, To change the To/Cc/Bcc status of an already set addressee, highlight the destination To delete an already set addressee, highlight the To field ☛ Key in the subject. Highlight the Subject field ➔...
  • Page 49 No. Compose menu options (Continued) – Exit Shifts to the Compose MMS screen. – Save Saves the currently created MMS. – Preview Displays the created slides in order from the beginning at the preset playback time for each. – Add slide 1 Add slide 2 Insert slide –...
  • Page 50: I-Mode Screen

    Using the Edit menu options ☛ From the Compose mail/Compose MMS/Edit mail/Edit MMS screen, No. Edit menu options – Send Sends the mail. – Save Saves the mail being edited to the draft folder. – Attach file Attaches a file to the mail. –...
  • Page 51: I-Mode Menu Screen

    i-mode screen menus i-mode Displays the i-mode menu screen (For details, see “i-mode menu screen menus” ). Settings Ringer time Connection No. i-mode lock i-mode menu screen From the i-mode menu screen you can access to the iMenu/Mail/Message screen, your bookmarks, the entry screen for a URL to be displayed, the access history, the saved pages, the list of Java™...
  • Page 52 i-mode menu screen menus (Sheet 2 of 3) Bookmarks Displays the list of bookmarked web pages. Bookmarks options menu Open Copy address Edit title Add desktop icon Create message Delete one Delete all Go to webpage Displays the URL you key in, the URL in the address history, or the homepage. Enter address Address history Go to home...
  • Page 53: Imenu Screen

    i-mode menu screen menus (Sheet 3 of 3) Saved pages Saved pages details Options menu (Continued) Save image Edit title Certificate info Page info Protect On/Off Delete Settings Changes the settings of your browser. Set time out Load images Wrap text Certificates Send terminal info Sets whether to display a confirmation message before sending the terminal information to Set homepage...
  • Page 54: Mail Screen

    Browser options menu – Add bookmark Bookmarks the current page. – Bookmarks Displays the Bookmark list. This option is displayed only when one or more bookmarks are registered. – Save image Saves an image on the current page. This option is displayed only when one or more images are displayed on the current screen. –...
  • Page 55 Mail screen menus (Sheet 2 of 5) Compose MMS Displays the Compose MMS screen (see “Creating a new MMS” on page 34). Inbox Displays the list of received mail/MMS. Inbox list Options menu – Show all – Show unread – Show read –...
  • Page 56 Mail screen menus (Sheet 3 of 5) Inbox – Copy subject (Continued) – Copy address – Play attachment – Browse attachment Plays the attachment content manually. – Protect On/Off Sent mail Displays the list of sent mail/MMS. Sent mail list Options menu –...
  • Page 57 Mail screen menus (Sheet 4 of 5) Sent mail Sent mail details Options menu (Continued) – Re-edit – Delete – Add desktop icon Creates a desktop icon that creates a new message to the addressee. – Save address – Save selection –...
  • Page 58: I-Mode Glossary

    Mail screen menus (Sheet 5 of 5) Mail settings 5 Auto reception (Continued 6 Receive attachment 7 Attachment data 8 Font size 9 Check settings 0 Back Back Returns to the i-mode menu screen. Depending on the conditions, some options may be displayed in gray and not be available. i-mode glossary The following defines the basic terms used in this section.
  • Page 59: Phonebook (M4)

    Phonebook (M4) Phonebook types Your phone can have up to 7 directories stored on your SIM card and in your phone memory: Complete (a list of all the numbers stored in the ADN and FDN), personal directories (ADN) in the SIM card, personal directories (ADN) in the phone memory, Service Dialling Numbers (SDN), Fixed Dialling Numbers (FDN), Own number and Voice mail number.
  • Page 60: Accessing Your Phonebook (M4)

    Abbreviated dialing number (ADN) Accessing your phonebook (M4) You can store personal information in the phonebook of your phone or your SIM card. Displaying a personal data (M41) ☛ 4 1 and the appropriate key for the desired directory or ➔...
  • Page 61 No. Phonebook list Options menu Copy Copies personal data to another phonebook (see “Copying and moving personal data” on page 50 for details). Current copy Package copy Move Moves the currently highlighted personal data to SIM, Phone, FDN, Own number or Voice mail number. Delete Deletes personal data.
  • Page 62 No. Phonebook list Options menu Sort Sorts the personal data in the order of alphabets or location number. Sorting may take time depending on the number of personal data entries, the number of characters contained in each entry and the type of language. Alphabetic Location Location...
  • Page 63 Editing an existing personal data ☛ 4 1 and the appropriate key for the desired directory or ➔ For the phonebook (SIM) and FDN, only the name, phone number and the location number can be added or edited in the following procedures. For the own number and voice mail number settings, only the name and phone number can be added or edited in the following procedures.
  • Page 64: Personal Data Options Menu

    Allocating sound/video as a ringer You can set a sound or video as a ringer for an incoming call. When a video is set, a movie is displayed on the screen with the sound. ☛ ➔ ➔ Highlight the Ringer field ☛...
  • Page 65: Setting The Voice Mail Number

    No. Personal data Options menu (Continued) Copy Copies the selected phone number(s)/Email address(es). ☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail number) ➔ Move Moves the currently highlighted personal data. ☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail number) ➔...
  • Page 66: Camera (M5)

    Camera (M5) Camera function enables you to take pictures or record videos and save them as Joint Photographic Expert Group (JPEG) files and 3rd Generation Partnership Project (3GPP) files respectively. You can enjoy the picture and video files in many ways: send them attached to an MMS or mail, set a picture file as the wallpaper for your phone, etc.
  • Page 67: Taking A Picture (M51)

    Taking a picture (M51) ☛ To activate the camera function, press and hold Side up or When you highlight Camera on the Camera screen, pressing SK1 creates a desktop icon of the camera function on the standby screen. ☛ Look into the camera view finder screen and adjust the camera position to place the target on the screen. You can switch the camera view finder screen between the main-LCD and the 2nd-LCD by pressing .
  • Page 68 No. Camera Options menu (before taking a picture) Photo size Sets the picture size to Sub-QCIF (128x96), QCIF (176x144), Main-LCD (176x220), CIF (352x288), VGA (640x480) or SXGA (1280x1024). You cannot use the Zoom function for VGA and SXGA, and you can select 1x to 2x magnification for Main- LCD and CIF, 1x to 4x magnification for QCIF and 1x to 5x magnification for Sub-QCIF.
  • Page 69: Recording A Video (M52)

    Camera Options menu (after taking a picture) No. Camera Options menu (after taking a picture) Save current Saves the currently displayed picture in the folder selected as Save in setting. Save all Saves all pictures taken in Burst mode. Create message Creates a new message with the file attached.
  • Page 70 You can discard the recorded video by pressing ☛ To save the recorded video, . The recorded video is saved as a 3GPP file in the Videos - My movies folder in My data (see page 58). Pressing # before/while playing a video file will enlarge the replay screen size, and pressing # will return the screen size to normal for Sub-QCIF only.
  • Page 71 No. Video recorder Options menu (before recording a video) Other settings Add desktop icon: Creates a desktop icon of the video function on the standby screen. Save in: Light: Brightness: Zoom: Camera: Flicker control: Selects 50Hz, 60Hz or Auto to prevent flickers when taking a picture under a fluorescent light. Switch finder Selects whether to display the viewfinder on the Main-LCD or the 2nd-LCD.
  • Page 72: My Data (M6)

    My data (M6) Using My data, you can playback sound and MP3 files, or display pictures and videos downloaded from the Internet or captured with the camera function of your phone. Videos (M61) In the following section, how to playback video files (videos) stored in your phone is described. You can either record videos using your phone, download them from the Internet, receive them attached to messages.
  • Page 73: Pictures (M63)

    Operations while playing sound ☛ To stop, SK2 ☛ To adjust the volume, Side keys. ☛ To replay the previous/next file, ▲ or ▼ Pictures (M63) The Pictures function allows you to display images and animations, which were obtained with the camera function of your phone, received as a file attached to MMS messages, or downloaded from the Internet.
  • Page 74 ☛ Move the stamp position ➔ to confirm ☛ SK1 when finished applying the stamp (the stamp preview will not be applied this time) Adding a frame to the image ☛ Highlight or display the image file you wish to edit various frames by ▲...
  • Page 75: Mp3 (M64)

    MP3 (M64) In the following section, the procedures to display and play your MP3 files are described. There is one pre-set folder: Download. Selecting and playing an MP3 file ☛ ▼ 4 or ➔ Highlight the MP3 file you want to play When the flat view function is activated, the list of folders is not displayed.
  • Page 76 No. File Selector Options menu Use item (Pictures) Set as wallpaper: Sets the selected image to be the main-LCD or 2nd-LCD wallpaper. Add desktop icon: Creates a desktop icon for the selected image on the standby screen. IR send: Print via USB: Use item (MP3) IR send: Create message...
  • Page 77: Java™ (M7)

    Java™ (M7) You can download Java™ applications (games etc.) from i-mode sites and run them on your phone. Programs (M71) How to run software To run a software (Java™ application), perform the following. ☛ ➔ 7 1 or press and hold SK2 When you display the Java™...
  • Page 78: Prog Backlight (M72)

    No. Application menu Network connection Permits/prohibits the selected software to connect to the network or displays the confirmation message every time you start the selected software. Auto start setting Enables or disables the automatic start of a complying Java™ application. Depending on the conditions, some options may be displayed in gray and not be available.
  • Page 79: Calculator (M82)

    MP3 player Options menu ☛ No. MP3 player Options menu Playlist Displays a list of MP3 files in the order in which they are played. You can save up to 30 MP3 files in the Playlist depending on the size of each file. The MP3 files that are moved or deleted from MP3 of My data or erroneous MP3 files are displayed in gray and cannot be played.
  • Page 80: Clock Alarm (M83)

    Calculator Key Assignment For calculator function, the keys are assigned different functions. The following shows the key assignment: Operation Addition (+) ▲ Multiplication (× ) Equals to (=) Memory Recall/Memory Cancel (Press twice) Inversion (±) Decimal Point (.) Using the % function, you can calculate (100 + x) % of a figure (e.g. 200 + 5% = 210) and (100 - x) % of a figure (e.g. 200 - 5% = 190). Clock alarm (M83) This feature enables you to switch the clock alarm function on/off and to set the time, repetition and alarm tone.
  • Page 81: Scheduler (M84)

    Scheduler (M84) Scheduler enables you to enter reminders and appointments for particular time and date. Adding a new event ☛ ➔ Highlight the day ➔ Scheduler setting Event date/time Sets the day, month, year, time and am/pm (for 12 hour format) of the event. Event end date/time Sets the day, month, year, time and am/pm (for 12 hour format) of the end of event.
  • Page 82: Scheduler Options Menu

    Scheduler Options menu ☛ ➔ Highlight the day ➔ No. Scheduler Options menu Add new Adds a new entry. Edit Edits the highlighted event. Copy Copies the highlighted event. Delete Deletes event(s). Press the appropriate keys for the event category (the currently selected event, all the public/private events on the day, all the past public/private events, all the public/private events or all the events) to delete.
  • Page 83: Todo Options Menu

    ToDo list setting (Continued) Priority Sets the priority (Normal, Low or High). Private Sets the ToDo task as private. ☛ When all settings are done, SK1 to save the setting. When a ToDo task is completed ☛ ➔ Highlight the list ➔...
  • Page 84: Notepad Options Menu

    Notepad (M86) Notepad function allows you to record and store a note as a text file. Creating a new memo (M861) ☛ 8 6 1 ➔ Key in text ➔ to save the entry as a text file. The first few words are displayed on the text list screen. Displaying a memo (M862) ☛...
  • Page 85: Voice Memo (M87)

    No. Notepad Options menu (Continued) Options Sorting order: Info column: You can also change the information on the column by pressing # without displaying the Options menu. Flat view: Save options: Reset options: Depending on the conditions, some options may be displayed in gray and not be available. Voice memo (M87) Voice memo function allows you to record up to 60 seconds of sound/voice, using your phone’s microphone.
  • Page 86: Converting Currency

    Currency (M88) Currency function allows you to convert an amount of money in one currency to another. Converting currency ☛ Currency setting From Sets the source currency code. Sets the destination currency code. Exchange rate Sets the exchange rate. ☛ If you wish to change the exchange rate, CLR to delete the displayed exchange rate and key in the required number (for decimal point, SK1) Amount...
  • Page 87: Synchronization (M80)

    Synchronization (M80) Synchronization function allows you to synchronize the data (phonebook, scheduler, ToDo list data) with PC application via the USB cable (option). This function can update such data between your phone and PC. Data should comply with vCard 2.1/vCalendar 1.0 specification. You cannot synchronize the phonebook data stored in the SIM card.
  • Page 88 Bluetooth setting ☛ 8 9 1 No. Bluetooth setting Bluetooth On/ Activates or deactivates Bluetooth function. Bluetooth Off If you switch the phone off while Bluetooth On is set, the next time you switch on, the phone will be in Bluetooth On status again.
  • Page 89 Device list icons The following icons will be displayed in the device list screen. Indicates the device is not registered. Indicates the device is a phone While using the Bluetooth device, the following icons will be displayed in the status bar area of your phone. Indicates that Bluetooth device is set to on.
  • Page 90: Ir Data Exchange

    IR Data Exchange Your phone is equipped with an InfraRed (IR) data port which enables you to send and receive picture/sound/MP3/video/ToDo list/scheduler/phonebook/ note data with cellphones or other devices equipped with IR ports. Do not aim or direct the IR data port towards your or other people’s eyes when using IR data exchange. Do not aim or direct the IR data port towards another IR device as this may cause the device to malfunction.
  • Page 91: Ir Receive (M8921)

    Video/Sound/Picture/MP3 (M6...) ☛ 6 1 for Videos, 6 2 for Sounds, ☛ 2 3 for Videos/Pictures, page 58 for details). Schedule entry (M84...) ☛ ➔ Highlight a date ➔ ToDo entry (M85...) ☛ ➔ Highlight Public, Private or All Note (M862...) ☛...
  • Page 92: Index

    Index Car mode AC adapter Certificate information Accepting an incoming call Access history Clock Accessory Clock alarm Clock selection Alarm volume Clock/Event display Colour style Animation Contrast Any key answer Correcting mistakes Currency Auto answer Auto redial Date Date format Bar calls Desktop icons Basic calls &...
  • Page 93 Making basic calls Phonebook Meeting mode Menu functions PIN activate Menu shortcuts selection PIN code Message PIN2 code Pocket mode Missed calls list Power saving Preparing the phone MMS messages MP3 player Multi-party calls Reading a message Mute Received calls list My data Receiving an incoming call Recording a call...

Table of Contents