Epson GX-80 Operating Manual page 57

C-26
nl
=
d MOD 256 and n2
=
INT( d I 256 ).
and are followed by d data bytes.
Explanation:
Tums on Single Density Graphics Mode. Printing 480 dots per
8-inch line. Where d is the total number of dots required nl and
n2 are calculated thus:
(data(d))
Set Quadruple Density Graphics Mode
Set High Speed Double Density Graphics Mode
Format:
ASCII code:
<ESC> V (n1) (n2) (data1) (data2)
ESCY
ESCZ '
Decimal:
27 89 (n1) (n2) (data1) (data2) ...
(data(d))
Hexadecimal:
18 59 (n1) (n2) (data1) (data2)
(data(d))
Explanation:
Tums on High-Speed Double Density Graphics Mode. Printing
960 dots per 8-inch line. Similar to ESC L but cannot print two
adjacent dots on the same row. Where dis the total number of
dots required nl and n2 are calculated thus:
nl
=
d MOD 256 and n2
=
INT( d I 256 ).
and are followed by d data bytes.
nl
=
d MOD 256 and n2
=
INT( d I 256 ).
and are followed by d data bytes.
C-27
Format:
ASCII code:
<ESC> Z (n1) (n2) (data1) (data2) ...
(data(d))
Decimal:
27 90 (n1) (n2) (data1) (data2)
(data(d))
Hexadecimal:
18
SA
(n1) (n2) (data1) (data2) ... (data(d))
Explanation:
Turns on Quadruple Density Graphics Mode. Printing 1920 dots
per 8-inch line. Where d is the total number of dots required nl
and n2 are calculated thus:
(data(d))
(data(d))
(data(d))
(data(d))
(data(d))
(data(d))
Set Single Density Graphics Mode
Set Double Density Graphics Mode
C.11 Dot Graphics
ESC K
Format:
ASCII code:
<ESC> K (n1) (n2) (data1) (data2)
Decimal:
27 75 (n1) (n2) (data1) (data2)
Hexadecimal:
18 48 (n1) (n2) (data1) (data2)
Format:
ASCII code:
<ESC> L (n1) (n2) (data1) (data2)
Decimal:
27 76 (n1) (n2) (data1) (data2)
Hexadecimal:
18 4C (n1) (n2) (data1) (data2)
ESC L
Explanation:
Tums on Low-Speed Double Density Graphics Mode. Printing
960 dots per 8-inch line. Where d is the total number of dots
required nl and n2 are calculated thus:
nl
=
d MOD 256 and n2
=
INT( d I 256 ).
and are followed by d data bytes.