1 Introduction
1.1 How to use this Manual
This manual provides information on installation, preventive maintenance, trouble
shooting and operation of the BullsEye
1.2 What you must know before you use the Robot
The power supply must always be switched off whenever work is carried out in the
controller cabinet.
NOTE! Even though the power is switched off at the robot controller, there may be
live cables which are connected to external equipment and are consequently not
affected by the mains switch on the controller.
Circuit boards - printed boards and components - should never be handled without
Electro-Static-Discharge (ESD) protection. Use the wrist strap located on the
inside of the controller door whenever handling any of these components.
505 942-102
®
product.
BullsEye® 7
Introduction
5