NEC PG-6200 User Manual page 97

SETTING
5 Use the CURSOR
or
"INACTIVE" and press the ENTER button.
Items to select
• INACTIVE . Normal operation setting. Power ON is accom-
plished through the rear panel or the POWER
button on the remote control.
• ACTIVE .... Bypasses rear panel power button (or the POWER
button on the remote control) to allow power ON
to be controlled by an AC switched outlet.
6 To complete, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
"OPTION" menu "ADJUST" menu
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
then press ENTER.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
button to select either "ACTIVE" or
Source screen
76
A U T O P O W E R O N M O D E
I N A C T I V E
A C T I V E
R E T U R N U S E R M O D E ?
Y E S N O