NEC PG-6200 User Manual page 60

ADJUSTMENT
Electrical Focus Adjustment
Adjust the center focus and edge focus electrically to obtain the best
screen focus.
NOTE:
• The CENTER focus adjustment should be performed for each CRT
separately.
• Select the FOCUS test pattern using the TEST button on the full
function remote control.
Proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 52 for the explanation of the PASS CODE.
2 Use the CURSOR
or
line. Press ENTER to display the FOCUS menu. You can also
select the FOCUS menu directly by pressing the INPUT "2"
button.
• "6/R, G, B GAIN" is not included in stand alone adjust menu.
3 Use the CURSOR
or
adjustment item. Press ENTER to display the selected adjustment
screen.
• You can also select the adjustment screen directly by pressing
the INPUT "1" or "2" button.
• For edge focus, you can select either "EDGE ALL" or "EDGE
SEPA." in the FOCUS EDGE mode of the OPTION menu.
(See page 89).
Items to select
• CENTER ......... The focus adjustment for the center of the
screen
• EDGE ALL ...... The focus adjustment for the edge area of the
screen (all CRTs)
• EDGE SEPA. .. The focus adjustment for the edge area of the
screen (each CRT)
NOTE:
• The adjustment screen can also be displayed by pressing the
FOCUS button on the full function remote control. The FOCUS
button will toggle between the CENTER and EDGE ALL/SEPA.
focus.
• The FOCUS CENTER adjustment screen can also be switched
directly to the FOCUS EDGE (ALL/SEPA.) adjustment screen
with CTL and CURSOR buttons and vice versa.
button to highlight the "2/FOCUS"
button to highlight your preferred
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / W H I T E B A L
6 / R , G , B G A I N
7 / H O U R M E T E R
8 / P A S S C O D E
9 / O P T I O N
– F O C U S –
1 / C E N T E R
2 / E D G E A L L
32