Table of Contents
Advertisement
After approximately five seconds, the flashing stops
and the display shows the time of day you set.
CHANGING THE TIME
You cannot change the time of day if
the Duration
operates.
Press
again and again until the indicator for the
Time of Day function flashes.
To set a new time, refer to "Setting the time".
PREHEATING
Preheat the empty appliance to burn off the
remaining grease.
Preheat the two ovens. Heat up one
oven at a time.
Set the functions listed below, if
applicable.
HOB - DAILY USE
WARNING! Refer to Safety chapters.
HEAT SETTING
Symbols
Off position
1 - 6
Heat settings
Use the residual heat to decrease
energy consumption. Deactivate the
cooking zone approximately 5 - 10
minutes before the cooking process is
completed.
HOB - HINTS AND TIPS
WARNING! Refer to Safety chapters.
COOKWARE
The bottom of the cookware must be
as thick and flat as possible.
or End
function
Function
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15 minutes.
5. Set the function
temperature.
6. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
Turn the knob to a necessary heat setting.
To complete the cooking process, turn the knob to
the off position.
RESIDUAL HEAT INDICATOR
WARNING! There is a risk of burns
from residual heat.
The indicator comes on when a cooking zone is
hot.
Cookware made of enamelled steel
and with aluminium or copper bottoms
can cause the colour change on the
glass-ceramic surface.
and the maximum
and set the maximum
and set the maximum
7
Advertisement
Table of Contents
