Table of Contents
Advertisement
Temperature lamp / symbol / indicator for
7
the top oven
Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Grill- / Roasting pan
To bake and roast or as pan to collect fat.
Before first use
WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories back to their initial position.
Setting the time
You must set the time before you operate the
oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time of Day function flashes.
Press the
or
to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day.
To change the time, press
until the indicator for the Time of Day function
flashes.
Hob - Daily use
WARNING!
Refer to Safety chapters.
Heat setting
Symbols
Off position
1 - 6
Heat settings
www.zanussi.com
again and again
Function
• Trivet
For roasting and grilling.
Use the trivet only with the Grill- /
roasting pan.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
Preheat the two ovens. Heat up one
oven at a time.
Set the functions listed below, if
applicable.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15 minutes.
5. Set the function
temperature.
6. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
Use the residual heat to decrease
energy consumption. Deactivate the
cooking zone approximately 5 - 10
minutes before the cooking process
is completed.
Turn the knob to a necessary heat setting.
To complete the cooking process, turn the knob
to the off position.
and the maximum
and the maximum
and the maximum
7
Advertisement
Table of Contents
