Master MT Pocket Use & Maintenance Manual page 33

Sharpening the blade
Important: To carry out this operation, it is essential to wear protective gloves and follow the safety recommenda-
tions since you will be working in direct contact with the blade.
First, press the ON/OFF switch on the machine to turn it off
1
and disconnect it from the power supply. IMPORTANT: The
machine must be stopped and disconnected before
manipulating it.
To remove the blade and sharpen it, you must unscrew
3
the bolts that join it to the motor shaft using an Allen key
Nº 3. IMPORTANT: The machine must be stopped
and disconnected before manipulation.
To reassemble the MT Pocket, position the blade as shown in
5
the following image. Using Allen key Nº 3, secure it to the shaft
with the bolts that were previously removed.
Next open the three latches on the grid and remove it to gain
2
access to the blade.
Finally, sharpen the cutting area of the blade. If you need more
4
information on how to sharpen the blade, contact the
manufacturer.
Replace the grid on the upper part and secure it with the three
6
latches.
www.masterproducts.es
33