Graco SaniForce 26C799 Instructions Manual page 13

Clean the Spray Tip
To reduce buildup, frequently clean the front of the
spray tip throughout the day.
1. Follow Pressure Relief Procedure, page 9.
2. Clean the outside of the spray tip with a soft cloth
or soft brush dampened with a compatible solvent.
NOTICE
To avoid damage to the spray tip, only clean the
spray tip with a compatible solvent and soft cloth or
soft brush.
Clear Clogs
1. Follow Pressure Relief Procedure, page 9.
2. Follow Disassemble the Spray Tip, page 15.
3. Clean the inside and outside of the spray tip with a
soft cloth or soft brush dampened with a
compatible solvent.
3A8816A
NOTE: As needed, soak the clogged tip in a
compatible solvent and use a soft bristled brush to
clean the tip. Do not use sharp or metal tools to
clean the spray tip.
NOTE: To remove a hardened particle from the
spray tip: Remove the spray tip and blow air
through the orifice from the front.
NOTICE
To avoid damage to the spray tip, do not use metal
instruments or sharp tools to clean the hole in the
spray tip. Metal instruments and sharp tools may
damage the hole in the spray tip and distort the
spray pattern.
4. Inspect parts for wear or damage. Replace parts as
needed.
Maintenance
13