ATEN VP2020 User Manual page 53

 Sets the ATEN Wireless Presentation as AP: Check this checkbox to
set the VP2020 / VP2021 as an access point. This makes the VP2020 /
VP2021 able to provide Wi-Fi coverage for participants to connect
wirelessly. This is the default setting.
 Pairs the ATEN Wireless Presentation to another AP: Check this
checkbox to set the VP2020 / VP2021 as an extender to another access
point. This allows users to extend their Wi-Fi coverage.
 Turns off the ATEN Wireless Presentation Wi-Fi capability: Check
this checkbox to disable the Wi-Fi function on the VP2020 / VP2021.
 SSID: The Wi-Fi name you see when you scan for an available
wireless network. This SSID can be changed via Device Name, see
Device Name, page 37.
 Hide SSID: Use the toggle to hide / unhide the SSID.
 Security: Sets the password required for the participants to connect to
the VP2020 / VP2021 wirelessly.
 None: No password is required for the participants to connect to
the VP2020 / VP2021 wirelessly. This is the default setting.
 WPA2: Check this checkbox to set a password for the participants
to connect to the VP2020 / VP2021 wirelessly. To see the
password you enter, click
 Band: Sets the Wi-Fi bandwidth for the VP2020 / VP2021.
 5G: Sets the VP2020 / VP2021 to broadcast 5G Wi-Fi bandwidth
signals. This bandwidth has higher data rate and smaller Wi-fi
coverage. This is the default setting.
 2.4G: Sets the VP2020 / VP2021 to broadcast 2.4G Wi-Fi
bandwidth signals. This bandwidth has lower data rate and larger
Wi-Fi coverage.
 Network Mode: Sets the VP2020 / VP2021's network mode.
 NAT: Sets the VP2020 / VP2021 to NAT network mode. In this
mode, the VP2020 / VP2021 allows mapping multiple devices
with local private IP addresses to a single public IP address before
transferring information. This is the default setting.
 Bridge: Sets the VP2020 / VP2021 to bridge mode. In this mode,
the VP2020 / VP2021 disables the NAT function, which means
the VP2020 / VP2021 will not give out any private IP address.
The VP2020 / VP2021 itself and the connected participant's IP
addresses are given out by a DHCP server-enabled device through
an Ethernet connection.
 Gatekeeper: Selects a gatekeeper option for the VP2020 / VP2021.
VP2020 / VP2021 User Manual
, click again to hide to password.
41