ATEN VP2020 User Manual page 20

Chapter 2. Hardware Setup
4. (Optional)
 To operate the unit via OSD (on-screen display), connect a USB mouse
to the unit's USB 2.0 Type-A, USB 3.0 Type-A, or USB-C ports.
 To use a USB-enabled touchscreen, connect the USB-enabled
touchscreen to the unit's USB 2.0 Type-A, USB 3.0 Type-A, or USB-C
and HDMI output ports.
5. To allow access to the web interface and to provide WiFi coverage for the
meeting members, connect an Ethernet cable to the unit's Ethernet port.
Optionally, connect the unit to a PoE-supported network switch for web
interface accessibility, WiFi coverage, and power supply.
6. (Optional) Connect the power adapter to the unit's power jack.
7. Install the WiFi antennas to the unit's WiFi antenna ports.
8. Power on the unit by pressing the power pushbutton, and the power LED
lights blue.
9. Download the ATEN Wireless Presentation App to join a meeting, share
contents, switch displays, and configure system settings to the unit.
8