ATEN VP2020 User Manual page 18

Chapter 2. Hardware Setup
No. Component
1 power pushbutton / LED Used to power on / off the VP2020 / VP2021, or
2 USB-C port
3 USB 3.0 Type-A port
4 WiFi antenna ports
5 audio output port
6 HDMI output port
7 USB 2.0 Type-A port
8 VGA output port
9 Ethernet port
10 power jack
6
enable/disable the standby mode. For details, see
Power LED Indication, page 9.
Connects to a USB mouse or a USB-enabled
touchscreen.
Connects to a USB mouse or a USB-enabled
touchscreen.
Connects to the supplied WiFi antennas.
Connects to a set of active speakers.
Connects to an HDMI-enabled display device.
Connects to a USB mouse or a USB-enabled
touchscreen.
Connects to a VGA display device.

Connects to a network switch via an Ethernet cable
to allow remote operation via the web console and
to provide WiFi coverage.

Connects to a PoE-supported network switch via an
Ethernet cable to allow remote operation via the
web console, provide WiFi coverage, and power
supply.
Receives a power adapter to supply power to the
VP2020 / VP2021.
Description