Mitel MiVoice 6900 Series Manual page 38

S
ETTINGS MENU
Navigate to Network > 802.1x using the navigation keys and press the Select softkey.
4.
Mitel MiVoice 6920 802.1x
In the EAP Type field, press the left and right navigation keys to enable an EAP authentication
5.
type/method (EAP-MD5 or EAP-PEAP).
Press the down navigation key to navigate to the Identity input field and enter the identity or user
6.
name used for authenticating the phone.
: The Backspace softkey can be used to delete the last digit/character entered and the ABC/abc/123
NOTE
softkey can be used to switch the dialpad keys from lower to uppercase as well as from alphabetic to
numeric.
Press the down navigation key to navigate to the Password input field and enter the password used
7.
for authenticating the phone.
: The Backspace softkey can be used to delete the last digit/character entered and the ABC/abc/123
NOTE
softkey can be used to switch the dialpad keys from lower to uppercase as well as from alphabetic to
numeric.
Press the Save softkey to save your changes.
8.
To configure 802.1X settings on the Mitel MiVoice 6940 IP phone and the Mitel 6970 IP Conference
Phone:
Press the
1.
Tap the Advanced softkey.
2.
Input the Administrator password using the dialpad keys (default is 73738) and tap the Enter softkey.
3.
Tap the Network icon.
4.
Tap the 802.1x icon.
5.
(Settings) key on the phone to enter the Settings menu.
Mitel MiVoice 6930 802.1x
N
ETWORK
33