Configuring 6900 Phones For Mivoice Connect Deployment - Mitel MiVoice 6900 Series Manual

S
ETTINGS MENU
Tap the Advanced softkey and enter the Admin password (default is 73738).
6.
Navigate to Network > Static Settings.
7.
In the Call Server IP Address field type the IP address of the MiVoice Business server.
8.
In the TFTP Server IP Address field type the IP address of your local TFTP server with the down-
9.
loaded firmware.
Tap the Save softkey.
10.
Tap the Restart softkey and confirm the restart.
11.
: For MiCloud Flex deployments, enter the call server FQDN instead of the IP Address to register the
NOTE
phone.
For more information, see MiCloud Flex Deployment Guide.

Configuring 6900 phones for MiVoice Connect Deployment

To configure static network settings for 6900 phones on MiVoice Connect deployment.
On the phone, press the Settings key > Advanced softkey.
1.
Enter the Admin Password and select Network > Static Settings.
2.
Configure the IP Address, Subnet Mask, and Gateway parameters.
3.
Select Save.
4.
If the DHCP fails, then users have the option of bringing the 6900 phone back to service if they have
configured a static IP Address, Subnet Mask, and Gateway. If these are configured, then if the DHCP
process fails, the 6900 set skips the DHCP process and auto-prompts the user to choose a service and
input parameter values and then gets back into service.
If the user chooses MiCloud Connect, the 6900 set flips to SIP if the SIP build is present in the inactive
•
partition.
If the user chooses MiVoice Connect and enters configuration server as the input, then after reboot,
•
the set skips the DHCP process and downloads SIP firmware.
If the user chooses MiVoice Border Gateway and inputs the call server address, then after network
•
stack and restart, the 6900 set skips the DHCP process and comes back into service.
N
ETWORK
22