Hilti TE 800-AVR User Manual
Hide thumbs
Also See for TE 800-AVR:
- Operating instructions manual (156 pages) ,
- Manual (49 pages) ,
- Original operating inctructions (64 pages)
Related Manuals for Hilti TE 800-AVR
Summary of Contents for Hilti TE 800-AVR
- Page 1 User Guide TE 800-AVR Breaker Martello Hire & Logistics Limited Unit 12 Riverside Industrial Estate West Hythe Road Hythe Kent CT21 4NB Tel: 01303 901399 P a g e...
- Page 2 User Guide TE 800-AVR Breaker Information about the documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. Observe the safety instructions and warnings in this documentation and on the product.
- Page 3 The type designation and serial number are printed on the rating plate. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product.
- Page 4 Safety - General power tool safety warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
- Page 5 Power Tool Use Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Page 6 materials such as lead-based paint, certain types of wood and concrete/masonry/stone containing quartz, minerals or metal can be harmful to health. Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate for the type of dust generated.
- Page 7 2. Push the accessory tool into the chuck as far as it will go (until it engages). ➥ The product is ready for use. 3. Pull the chuck back as far as it will go and remove the accessory tool. Use only the recommended grease supplied by Hilti. Use of unsuitable grease may cause damage to the product. Removing the Accessory Tool CAUTION Risk of fire! Risk of contact between the hot accessory tool and highly inflammable materials.
- Page 8 Do not operate the product if signs of damage are found or if parts malfunction. Contact Martello Hire & Logistics Ltd. After cleaning and maintenance, fit all guards or protective devices and check that they function correctly. To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Transport and Storage Transport Do not transport this product with an accessory tool installed.