Table of Contents
Advertisement
Application
1 Application
Burner control unit BCU 440 controls, ignites and mon-
itors gas burners in Continuous operation.
It can be used for directly ignited industrial burners of
up to 350 kW. The BCU is installed near the burner to
be monitored.
The program status, the unit parameters and the level
of the flame signal can be read directly from the unit.
If the local requirements on the burner control unit
change, the PC software BCSoft can be adjusted to the
unit parameters of the application by using the optical
interface.
BCU 440 · Edition 01.17
The service personnel is supported by a convenient vis-
ualisation system of the input and output signals and
the error history.
▼
The BCU unites
the functionally
interrelated com-
ponents of auto-
matic burner con-
trol unit, ignition
transformer, Man-
ual/Automatic
mode and display
of operating and
fault statuses in
a compact metal
housing.
4
Advertisement
Table of Contents
